LeakAlertor – Electronic Water Leak Monitor (LA-1000)

High water bills?

Worried about running your well dry?

Are you saturating your septic system?

Every toilet will leak…..it’s only a matter of time.  In fact, the AWWA estimates that 20% of the 270 million toilets in the US (55 million!) are leaking right now.  Even a silent, slow toilet leak can waste 200 gallons of water or more per day, yet often remains undetected.  That wasted water can cost $50 or more a month, making leaking toilets the #1 cause of high water and sewer bills.

The LeakAlertor™ is the only small, low cost, fully automatic leak detection device for toilets that installs in seconds without tools.  It electronically monitors the water flow in the toilet tank and notifies the resident of a leak with visual and audible alerts. Once the toilet is fixed, the LeakAlertor™ resets itself, ready to identify the next leak.  Priced under $20, the LeakAlertor™ can pay for itself in less than two weeks depending on the severity of the leak.  It works on all flapper based toilets. The included battery lasts 12-15 months, depending on leak activity, and can be replaced by the user when it gets low.

Water Leak Facts

- 1 out of every 5 toilets in the U.S. is leaking at any point in time.

- Leaking toilets are the number one cause of high water bills.

- The average leaking toilet wastes 100 gallons of water per day, or nearly 40,000 gallons of water per year, enough to fill an Olympic sized swimming pool.

- The total water loss due to leaking toilets has been estimated to be as high as 5 billion gallons per day, or nearly 2 trillion gallons per year!

Every toilet IS going to leak…it’s only a matter of time. LeakAlertor™ lets you know when.

The LeakAlertor™ electronically monitors your toilet and notifies you visually and audibly when the flapper is leaking.

Unique Features:

- Low cost
- Saves money
- Installs in seconds – No tools required
- Fully Automatic – No set up necessary
- Works on any toilet
- Visual and audible alerts
- Small, sleek design
- 100% designed, manufactured, and tested in the U.S.A.

Simple Installation

Make sure the toilet lid is down to prevent accidentally dropping the unit into the bowl.

1. Peel off the protective backing.
2. Press the unit onto the outside surface of the tank.
3. After attaching the unit to the tank, Remove the Battery Activation tab. The green lamp will flash and you will hear three beeps.
4. When the red lamp turns on, Flush the toilet.

That’s it, you’re done!

Visit: www.leakalertor.com